Broda 587 Spezifikationen

Last Revised: July 2008 587 Owner, Operator, and Maintenance Manual Model 587 Manual Wheelchair 560 Bingemans Centr

587 Tilt Wheelchair 10 1.14 Preventative Maintenance WARNING The maintenance on a BRODA wheelchair will vary with the amount of use and the conditio

587 Tilt Wheelchair 11If the caregiver performing the functional testing believes that any function is not operating correctly, the chair should be t

587 Tilt Wheelchair 12Lifting the chair by any removable or detachable parts may result in injury to the user, and will cause damage to the chair. C

587 Tilt Wheelchair 13SECTION 2 - DEFINITIONS AND TECHNICAL INFORMAION- 2.1 Definitions “BRODA” means BRODA Enterprises Inc. doing business as BRO

587 Tilt Wheelchair 14Side Panels Removable side panels provide lateral support and containment of the patient while sitting in the wheelchair. Dis

587 Tilt Wheelchair 152.4 Label Locations Weight Capacity Sticker Serial Number Label (Silver) WEIGHT CAPACITY 250 LBS. (114 kgs.) REFER TO OWNER

587 Tilt Wheelchair 16SECTION 3 - CAREGIVER MANAGEMENT BRODA’s unique and innovative wheelchairs provide the optimum in re-positioning functions and

587 Tilt Wheelchair 17SECTION 4 - WHEELCHAIR OPERATION 4.1 Armrests Removing & Installing the Armrests 1. Press in fron

587 Tilt Wheelchair 18 4.2 Anti-Tippers and Wheel Locks Locking/Unlocking the Rear Wheels 1. To lock push Wheel Lock Handle t

587 Tilt Wheelchair 19Anti-Tippers 1. All BRODA 587’s are equipped with anti-tippers which are removable and adjustable. However,

587 Tilt Wheelchair 2TABLE OF CONTENTS WARNING ...

587 Tilt Wheelchair 202. Push downward on the hand grips at back of wheelchair while pressing the tilt handle (patient weight will dictate the amoun

587 Tilt Wheelchair 21 1. Turn the Attachment Tube Handle at the bottom of the pole to loosen and release the clamp so that the clamps can be attach

587 Tilt Wheelchair 22 Attaching Headrest 1. Insert the vertical post into the mounting tube 2. Place the headrest at the desired height a

587 Tilt Wheelchair 23 Seat Height Post Adjustment: 1) Locate the seat height adjustment bolts on both sides of th

587 Tilt Wheelchair 24 Caster Height Adjustment: 1) Locate the three caster fork adjustment positions on the front casters,

587 Tilt Wheelchair 252) Remove the two seat plugs from the front of the seat frame (one on each side of the seat). 3) Install the two new seat exte

587 Tilt Wheelchair 26SECTION 5 - WHEELCHAIR REPAIR AND MAINTENANCE 5.1 Suggested Tool Kit A variety of fasteners are used in the assembly of BRO

587 Tilt Wheelchair 27 Note: Please include the model number and serial number of the wheelchair whenever you are ordering parts. These can be found

587 Tilt Wheelchair 286. Hook the end of the cable into the lever in the actuator and clip the cable housing into the actuator housing. 5.4 Rear

587 Tilt Wheelchair 29 Replacing the Rear Wheel Hand Rim 1. Remove rear wheel(s) from wheelchair (see Removing/Installing the Rear Wheels) 2.

587 Tilt Wheelchair 3WARNING DO NOT OPERATE THE BRODA 587 WITHOUT FIRST READING AND UNDERSTANDING THIS MANUAL. IF FOR ANY REASON THE WARNINGS OR INS

587 Tilt Wheelchair 30Installing/Replacing Fork Assemblies 1. Using a 17mm wrench remove the locknut securing the fork to the caste

587 Tilt Wheelchair 31Part No. Description Where Used Part No. PRT-PAB7 350N locking gas cylinder with a 10” long body Used for the seat tilt Ho

587 Tilt Wheelchair 322. From the above instructions, determine whether you want to wind the stem further into the actuator or further out of the ac

587 Tilt Wheelchair 33Installing and Replacing Vinyl Straps The vinyl strapping has both elasticity and memory retention, which allows each strap to

587 Tilt Wheelchair 34APPENDIX 1 - BRODA WARRANTY Register your warranty online at www.brodaseating.com BRODA Seating April 2008 GENERAL INFORMAT

587 Tilt Wheelchair 4GENERAL INSTRUCTIONS The instructions contained herein provide guidance on the safe and correct operation of the BRODA Model 58

587 Tilt Wheelchair 5SECTION 1 - SAFETY REQUIREMENTS & DETAILED WARNINGS This section must be read by all operators of the BRODA wheelchair befo

587 Tilt Wheelchair 6Do not use the footplates for transfers. Do not stand on the footplates. When performing transfers, or getting in or out of th

587 Tilt Wheelchair 71.3 Legal Restrictions WARNING BRODA wheelchairs may only be used as described in this manual and with proper regard for recogn

587 Tilt Wheelchair 8 The seat depth, back height, size and position of the wheels, use of the anti-tippers, as well as custom dimensions or changes

587 Tilt Wheelchair 9surface is uneven or sloped are at risk of unintended movement and could become a serious danger to the patient, caregiver(s), o